Adaption Plate Manufacturing
Action Automation engineers and designs adaption plates that allow you to retrofit old valves with new actuators, new valves with old actuators, or gear operators on valves that are to difficult to operate. 
 
For Valves with existing mounting plates:
Simply measure the bolt circle of the existing mounting plate, the plate thickness, the OD and the ID of the existing plate.  Measure and record the distance from the top of the valve stem (in the fully closed position) to the top of the existing valve plate. Then tell us what size actuator you are wanting to use, and we can make the plate to suit your purpose perfectly.
 
For Handwheel operated valves:
Remove the existing handwheel, the yoke nut locking nut and the yoke nut itself.  Measure and record the  the OD and the ID of the neck of the valve yoke. Measure and record the distance from the top of the valve stem (in the fully closed position) to the top of the valve yoke. Then tell us what size and type actuator you are wanting to use, and we can make the plate to suit your purpose perfectly.  Welding will be required to permanently attach the plate to the valve.  Care must be given to assure perpendicularity. 
 
Providing that all the data given is correct, we can quickly produce custom made adaption plates that will allow you to continue to automate your plant under the tightest budget and time constraints.  We can provide you CAD drawings of the plates we manufacture for an additional cost.